Back |1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12
Time to start fitting all the bits
Engine slots into place – does that look good or what!! Flaps fit into place, radiators fixed in place and auxiliary fuel tank fitted.
Nearly there now, time to look at the aerials. I’ve used EZ fine line for these as its coloured black and resists being knocked unlike stretched sprue. In order to fit these in place I used a very small drill to drill out holes in the desired positions before locating the line in the wholes and dabbing superglue to fix them in position. Another bit of advice is to fit the antennae into its base but don’t glue this in place – the reason for this is you can them remove it when you transport the model and thus stopping it being broken off. A coating of matt varnish was also applied and the door was put the right way up!!
Undercarriage next…
